ELINBOND E107HF

Halogen Free, High Strength Epoxy Adhesive

Key Features

● Sag resistance,No flow during cure even on vertical surface

● Halogen free,Environment friendly

● High hot strength,Structural bonds at elevated temperatures



 

 



Discuss your application  Request a Technical Data Sheet  Request an MSDS

Product Description

ELINBOND E107HF is a one component, heat cured, gray, general purpose epoxy adhesive and sealant. It is slurry, easily pumped, non- abrasive paste and features a long shelf life at room temperature. Cured ELINBOND E107HF has excellent resistance to heat and excellent dielectric properties. It features excellent chemical, water and solvent resistance.


Applications

ELINBOND E107HF is designed for the assembly and insulation of copper and other metals, and rigid plastics. It is also used for high temperature structure bonding.

 

Instructions For Use

Thoroughly read the information concerning health and safety contained in this bulletin before using. Observe all precautionary statements that appear on the product label and/or contained in individual Material Safety Data Sheets (MSDS).
To ensure the long term performance of the bonded assembly, complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt, and oils which can cause poor adhesion or corrosion in a bonded part. For information on proper substrate preparation, refer to the reprint "Good Adhesive Bonding Starts With Surface Preparation" available from E-LINKING.
Apply the adhesive to all surfaces to be bonded and join together. In most applications only contact pressure is required.


 

Packaging

Cans

Request Information

Discuss your application  Request a Technical Data Sheet  Request an MSDS

 

OurLatest Product

您好,是时候升级你的浏览器了!你正在使用 Internet Explorer 的过期版本,Internet Explorer 8 可以为你提供更快、更安全的浏览体验,提供更好的隐私保护。立即下载