ELINOPTO E131

Halogen Free, High Strength Epoxy Adhesive

Key Features

● Excellent resistance to water permeation, Extended life time of E-paper, OLED display

● Very fast thermal cure at temperatures below 80°C, Energy saving ans low damage to devices

● One component, No mixing required, easy to use.

 



 

 

 

Discuss your application  Request a Technical Data Sheet  Request an MSDS

Product Description

ELINOPTO E131 is a single component, thermal curable non-conductive epoxy adhesive.  It has excellent permeation resistance to water and its rheology is designed for high throughput display assembly.


Applications

ELINOPTO E131 is designed to be used as a perimeter sealant in E-paper, OLED displays or any other type of display that requires protection against humidity and oxygen.

 

Instructions For Use

Thoroughly read the information concerning health and safety contained in this bulletin before using. Observe all precautionary statements that appear on the product label and/or contained in individual Material Safety Data Sheets (MSDS).
To ensure the long term performance of the bonded assembly, complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt, and oils which can cause poor adhesion or corrosion in a bonded part. For information on proper substrate preparation, refer to the reprint "Good Adhesive Bonding Starts With Surface Preparation" available from E-LINKING.
This material is designed for pin transfer, dot dispensing, and/or syringe applications. Dispense the desired amount of material and place die into deposit using downward force to achieve desired bondline.
Apply the adhesive to all surfaces to be bonded and join together. In most applications only contact pressure is required.

 

Packaging

Syringes

Request Information

Discuss your application  Request a Technical Data Sheet  Request an MSDS

 

OurLatest Product

您好,是时候升级你的浏览器了!你正在使用 Internet Explorer 的过期版本,Internet Explorer 8 可以为你提供更快、更安全的浏览体验,提供更好的隐私保护。立即下载