UV Curable Adhesive And Sealant

Key Features

● One component,Ease of use;

● Excellent adhesion and toughness,Structural bonding to a wide variety of substrates;

● UV Cure, Quick speed UV processing.




Discuss your application  Request a Technical Data Sheet  Request an MSDS

Product Description

ELINBOND A203-2 is a one component, UV curable adhesive and sealant. It bonds well to glass and plastic substrates like ABS, PP, PET, PVC. ELINBOND A203-2 cures rapidly to form toughness, transparent bonds when exposed to ultraviolet light of sufficient irradiance. It features good chemical and solvent resistance and good electrical insulation.


ELINBOND A203-2 is primarily designed for bonding a wide variety of substrates including glass, many plastics and most metals.
ELINBOND A203-2 can be syringe dispensed to form a low profile sealant bead at the metal / plastic interface.


Instructions For Use

Thoroughly read the information concerning health and safety contained in this bulletin before using. Observe all precautionary statements that appear on the product label and/or contained in individual Material Safety Data Sheets (MSDS)
To ensure the long term performance of the bonded assembly, complete cleaning of the substrates should be performed to remove contamination such as oxide layers, dust, moisture, salt, and oils which can cause poor adhesion or corrosion in a bonded part. For information on proper substrate preparation, refer to the reprint “Good Adhesive Bonding Starts with Surface Preparation” available from E-LINKING Co., Ltd.
This product is light sensitive; exposure to daylight, UV light and artificial lighting should be kept to a minimum during storage and handling. The product should be dispensed from applicators with black feedlines.
Cooling should be provided for temperature sensitive substrates such as thermoplastics. Plastic grades should be checked for risk of stress cracking when exposed to liquid adhesive. Excess uncured adhesive can be wiped away with organic solvent (e.g. Acetone). Bonds should be allowed to cool before subjecting to any service loads. Apply the adhesive to all surfaces to be bonded and join together. In most applications only contact pressure is required.



  Syringes   bottles


OurLatest Product

您好,是时候升级你的浏览器了!你正在使用 Internet Explorer 的过期版本,Internet Explorer 8 可以为你提供更快、更安全的浏览体验,提供更好的隐私保护。立即下载